User's Manual Part 9

M12 'U'-Bolt

Ø115mm(4-1/2in)

Mounting Pipe

(not supplied)

M20 'U'-Bolt

6ft Antenna Azimuth

Adjustment Assembly

( for 4ft version see fig. 8)

Mounting

Bracket

Figure 2. Tower Mount Assembly

Antenna Support

Clamps

M20 Lockwasher

& Nut

'A'

'D'

Antenna Elevation

Adjustment Assembly

'C'

Reflector

Mounting Ring

'B'

M12 Lockwasher

& Nut

Material Check. Unpack all materials and inspect

for any shipment damage. Refer to Parts List (Table

1) to assist in identification.

Tightening of Hardware. It is recommended that

all hardware is tightened to the torques specified in

Table 2. The integrity of the mount depends on all fasten-

ers being properly tightened.