User's Manual Part 9

6
7
polarization
indicator
notch
Rotate feed
hub (4) to
adjust
polarization
Table 2. Fastener Torque Specifications
Fastener Torque value in N·m (lb·ft ) for each fastener size
Size M5 M6 M8 M10 M12 M16
Stainless 4.5 7.7 18.7 39.2 65.1 161
steel (3.3) (5.7) (13.8) (28.9) (48) (118.7)
Galvanized 2.7 4.5 11.1 22 38 95
steel (2) (3.3) (8.1) (16.2) (28) (70.1)
Remove 4 off M6
bolts to adjust
polarization
Vertically Polarized Application
Rotate feed
hub (4) to
adjust
polarization
Remove 4 off M6
bolts to adjust
polarization
Horizontally Polarized Application
polarization
indicator
notch
Loosen for
adjusting
azimuth
Loosen for
adjusting
azimuth
Adjust
azimuth
turnbuckle
(6)
Caution:
1
2
3
Loosen for
adjusting
elevation
Loosen for adjusting
azimuth to avoid
reflector damage
4
Adjust
elevation
Table 1. Antenna Parts List
Item Description Part no. Qty
1 Reflector/shield assembly 113502 1*
2 Mount plate 108992 1*
3 Mount angle bracket 108984 2*
4 Feed assembly # 1*
5 Radome # 1*
6 Azimuth adjustment turnbuckle 224403-2 1
7 Mount pivot plate 109103 1
8 Half clamp (cap) 109036 1
9 Elevation adjustment bolt 109105 1
10 Upper bracket 108995 1
11 Slotted bracket 108994 1
12 Spacer 109104 1
13 Bevel washer 224322-1 1*+3
14 M12 x 110 hex head bolt, gs 100535-132 2
15 M12 x 45 hex head bolt, gs 100535-42 1*+2
16 M12 x 80 carriage bolt, gs 204026-4 1
17 M12 x 45 carriage bolt, gs 204026-2 2
18 M16 flat washer, gs 100521-51 3
19 M12 flat washer, gs 100521-45 8
20 M12 lock washer, gs 100522-45 8
21 M12 hex nut, gs 100526-45 1*+7
22 O-Ring 106837-3 1
23 Silicone Grease (tube) 12225 1
* Part of antenna sub-assembly
# Frequency Dependant
gs Galvanised Steel