User's Manual Part 9

2(10)
1. Tools required for installation
Tools are not included with antenna:
•
Hoisting device for 250 daN
•
Shackle
•
2 ropes
•
Water balance and compass
•
Mallet
•
Wrenches for hexagon bolts:
M5(8), M6(10), M10(17), M12(19), M14(21), M16(24), M20(30)
(values in brackets=openings of spanners)
•
Torque wrench from 0,5 to 25 daNm
•
Nail set or punch for
∅
6mm.
2. Assembly of the mount
For easy operation of the bolted joints, « Anti Seize »Installation Paste should be
applied to all threads of bolts and fine adjustment spindles.
After this, keep the lubricated threads free of dust and dirt!
Fastener torque specification see table attached!
Bracket left
screw M16X50
washer 17
sl nut M16
ELEVATION spindle M16
2 brass nuts M16
2 spherical washers C17
2 conical seats D19
EL-bracket
4 screws M12X35
8 washers 13 ∅24
4 sl nuts M12
3 U-Bolts M14
with
6 washers 15
12 nuts M14
Azimuth clamp
AZIMUTH spindle M12
2 brass nuts M12
2 spherical washers C13
2 conical seats D14.2
2 washers 13 ∅32
6 screws M12X35
6 washers 13 ∅24
6 washers 13 ∅40
6 sl nuts M12
2 screws M20X50
2 washers 21
2 sl nuts M20
Bracket right
2 washers 13 ∅24
2 brass nuts M12