User's Manual Part 9

6(9)
6. Feed installation
The feed is a precision component which should be handled with special care
during installation. For instance, always carry the feed, supporting both ends.
Any damage may degrade the antenna’s performance. Repair of feeds is not
possible in the field.
6.1. Guy Wire Assemblies
• Insert the 3 guy wires in the mounting holes on the rear of the reflector.
• Move the feed assembly partway through the connecting ring.
• Hook the guy wires into the rotatable guy ring
• Move the feed and fix it, with the 4 screws M5, in the connecting ring.
rotatable feed guy ring