User's Manual Part 9

2(9)

1. Tools required for installation

Tools are not included with antenna:

• Hoisting device for 250 daN

• Shackle

• 2 ropes

• Water balance and compass

• Mallet

• Wrenches for hexagon bolts:

M5(8), M6(10), M10(17), M12(19), M14(21), M16(24)

(values in brackets=openings of spanners)

• Torque wrench from 0,5 to 15 daNm

• Nail set or punch for ∅6mm.

2. Assembly of the mount

For easy operation of the bolted joints, « Anti Seize »Installation Paste should be

applied to all threads of bolts and fine adjustment spindles.

After this, keep the lubricated threads free of dust and dirt!

Fastener torque specification see table attached!

screw M16X55

washer 17

∅

40x6

screw M16X55

washer 17

∅

30x3

ELEVATION

spindle M10X100

2 brass nuts M10

2 washers 10.5

AZIMUTH

spindle M8X200

2 washers 8.4

2 brass nuts M8

2 U-Bolts M14

4 washers 15

8 nuts M14

screw M8X30

washer 8.4

sl nut M8

safety collar

U-Bolt M10

2 washers 10.5

∅

4 nuts M10