User's Manual Part 9

6
Position the radome on the shield with the
red flash nearest the top of the antenna.
Assemble radome to the shield with
bolts(5), lock washers (2), and flat washers (4).
Tightly attach the angle adaptor (10) to the top
of the reflector rim with the adaptor bolt (11)
to accommodate a hoist line choker.
4
5
2
11
Hoist line
choker
Hoist
line
5
10
Fit bolts (1), lock washers (2) and nuts (3)
to remainder of holes of the reflector and
tighten. Tighten all shield segment
fastenings.
Reflector
Shield
assembly
1