User's Manual Part 9

Description

This antenna consists of a 0.8-meter (2.5ft) shielded reflector,

radome, feed, and offset tower mount. The mount is designed

to attach the antenna to a vertical tower pipe of diameter 64

to 115 mm (2.5 to 4.5"). The mount also provides adjustment

ranges of ±50° elevation and ±180° (+15, -7.5° fine) azimuth.

Notice

The installation, maintenance, or removal of antenna systems

requires qualified, experienced personnel. Manufacturer's

installation instructions have been written for such personnel.

qualified personnel to verify proper installation, maintenance,

and condition of equipment.

Manufacturer disclaims any liability or responsibility for the

results of improper or unsafe installation practices.

Apply silicone grease (23)

to O-ring (22) prior to fitting

Ceragon systems should be inspected once a year by