User's Manual Part 9

3
Feed
Feed
guy
ring
5
Polarization
indicator notch
Rotate feed hub to
adjust polarization
Remove 4 off M6
Cap Screws to
adjust polarization
Attach guy hooks
to feed guy
ring and pass
feed through feed
mounting hole
Vertically Polarized Application
Remove 4 off M6
Cap Screws to
adjust polarization
Polarization
indicator notch
Rotate feed hub to
adjust polarization
Horizontally Polarized Application
4
Reflector
Apply conductive
grease (7) to these
surfaces
(See Warning)
1
4
3
Apply conductive
grease (7) to threads
(See Warning)
5
Apply silicone grease
(6) to O-Ring
Warning: Use protective wear to avoid skin contact with the conductive
grease. Keep away from mouth. Wash thoroughly after use with liberal
amounts of liquid soap and rinse with water. Do not store open near food or
food sources. Contents: oil, clay, and zinc dust.