User's Manual Part 8

Table 1. Antenna Parts List
Item Description Part no. Qty
1 Reflector assy (1ft) # 1
Reflector assy (2ft) 113503 1
2 Mounting bracket 109457 1
3 Mount pivot plate 109087 1
4 V-clamp 109088 3*
5 Elevation adjustment bolt 109092 1*
6 Elevation pivot boss 109273 1*
7 Radome (1ft) 107924-DET§ 1
Radome (2ft) 108991-DET§ 1
8 Azimuth adjustment clamp 109093 1
9 Feed assembly (2ft) # 1
Feed assembly (2ft) # 1
10 M6 x 16 soc head screw, ss 100622-9 4
11 M6 lockwasher, ss 100522-29 4
12 M6 flatwasher, ss 100521-30 4
13 M10x 70 hex hd scr, ss 100534-100 2*
14 M10 spring washer, ss 100522-37 4*
15 Flat washer, ss 100521-37 4*
16 M10 x 45 hex head screw, ss 100534-55 3*
17 M10 spring washer, gs 100522-39 6*
18 M10 hex nut, gs 100526-39 6*
19 M10 x 150 hex head screw, gs 100534-160 6*
20 M10 hex nut, ss 100526-37 7*
21 M10 x 75 hex hd screw, ss 100534-109 1*
22 M5 x 16 pan hd screw, ss (1ft) 100510-45 4
M6 x 20 pan hd screw, ss (2ft) 100511-34 6
23 M6 flatwasher, ss (1ft) 100521-19 4
M6 flatwasher, ss (2ft) 100521-25 6
24 M6 lockwasher ss (1ft) 100522-21 4
M6 lockwasher ss (2ft) 100522-25 6
25 Allen Key 100668-6 1
26 Vinyl Glove 207402 2
27 Silicone grease (tube) 12225 1
28 M10 x 40 c'sk skt hd scr, ss 204035-26 3*
29 'O'-ring 106837-3 1*
30 Loctite (sachet) 108171 1*
31 Conductive Grease 203233-2 1
ss/gs stainless steel/galvanized steel
# Frequency Dependant
§ DET is a variable part number depending on, where applicable,
frequency, colour & logo requirement
* Mount Kit 109913-4
7
8
Loosen nut (20)
and adjust
elevation
Loosen for
adjusting
azimuth
Adjust
azimuth
Loosen ¼ turn
for
adjusting
elevation
Remove polyester
tape prior to fitting
radio
Table 2. Fastener Torque Specifications
Fastener Torque value in N·m (lb·ft ) for each fastener size
Size M5 M6 M8 M10 M12 M16
Stainless 4.5 7.7 18.7 39.2 65.1 161
steel (3.3) (5.7) (13.8) (28.9) (48) (118.7)
Galvanized 2.7 4.5 11.1 22 38 95
steel (2) (3.3) (8.1) (16.2) (28) (70.1)
1ft version
shown
(polarization (H or V set by the integrated radio)
29
Apply silicone grease
(27) to 'O' ring prior
to assembly
(10, 11, 12)
Remove polyester
tape prior to fitting
radio
Vertically Polarized Application
Remove Cap
Screws to adjust
Polarization
Polarization
Alignment Mark
Single Polarized Application
Remove polyester
tape prior to fitting
radio
Horizontally Polarized Application
Polarization
Alignment Mark
Remove Cap
Screws to adjust
Polarization