User manual

12
Inputs & Outputs commands
I2:xxx
debounce time for input 2 (in seconds)
V1:x
1 - invert input 1
0 - normal input 1
V2:x
1 - invert input 2
0 - normal input 2
Table 3: Inputs & Outputs commands
CLIP commands
CL:
add clip list number, asterisk symbol (*) is also supported
CD:
remove clip list number
Table 4: CLIP commands
DATA commands
EMAIL:
1 - enable E-Mail feature
0 - disable E-Mail feature
default is enabled
SMTPIP:XXXXX
defines SMTP server IPv4 address
example SMTPIP:"smtp.aol.com"
max length is 32
SMTPPORT:
defines SMTP server PORT
example SMTPPORT:2121
value must be a number, in range 0..
default is 25
APN:
defines GPRS APN (for E-Mails)
example APN:Internet
max length is 32
default is Internet
APNUSR:
defines GPRS USERNAME (for E-Mails)
example APNUSR:Patryk
max length is 32
default is empty
APNPWD:
defines GPRS PASSWORD (for E-Mails)
example APNPWD:Patryk
max length is 32
default is empty
SMTPUSR:
defines smtp username (used for authentication - this is not APN username!)
example SMTPUSR:"p.szymczak"
max length is 64 (according to RFC0821, chapter 4.5.3. SIZES)
default is empty
SMTPPWD:
defines smtp password (used for authentication - this is not APN password!)
example SMTPPWD:"p.szymczak"