Datasheet

© CEP AG, V2.1-04/2015
Product specifications are subject to change without prior notice.
Air Interface
 2G Frequency Band: GSM / GPRS Quad Band
 GPRS Class: Class 10
Software
 Device Configuration: SMS / Config Tool / Android App
 Status / Event Reporting: SMS / SMTP E-Mail / Android
App
 SW Update: DOTA / USB
 SMTP E-Mail: Transmission of Event Data
Hardware Features
 Housing: Robust and water protected, glass fibre
reinforced housing (min. GF30)
 SIM Card Holder: 1x (1,8/3 Volt)
 LEDs: 4x (Power / GSM / 2x Status)
Hardware Characteristics
 Operating Temperature: -30°C to +75°C
 Dimensions: 150x65x45 mm
 Weight: 230 g
Power Management
 Voltage Range: 7 - 32V DC
 Power Consumption (Typical): ~14 mA
Interfaces
 USB 2.0: 1x (USB-B connector; internal, for configuration)
 Digital Inputs: 2x (galvanically isolated; common external
ground)
 Switching Capacity (Relays): 2x (5A/250V AC, 5A/30V DC,
resistive load)
STD Smartphone App
The free of charge STD Android App simplifies the configuration
and utilization of the telemetry units. The following features
are supported
 Management of all listed
devices
 Direct control of Relais
 Extensive options for
configuration
 Tracing and monitoring of
device, etc.