User manual

3
Before putting a device into operation, it has to be clarified, whether this device or module is meant for
the field of application. In case of doubt ask specialists or the manufacturer of the device.
Please note that we are not responsible for any errors in usage or connection. Therefore we cannot
accept any responsibility for consequential loss.
Devices which operate with >32 Volt have to be connected by a specialist. Before putting the device
into operation it should be checked that there is no current leakage on the housing.
In case those measurements with the opened housing are necessary, an isolating-transformer has to be
integrated for safety reasons. Alternatively the voltage can be supplied by an appropriate power supply
which complies with the safety regulations. All wiring work has to be done in a voltage free state only.