User manual

Inputs & Outputs commands
BCT:
set charger timeout - time in seconds before device goes to sleep when Vcc is
disconnected. default is 120; 0 = infinite
Table 3: Inputs & Outputs commands
CLIP commands
CL:
add clip list number, asterisk symbol (*) is also supported
CD:
remove clip list number
Table 4: CLIP commands
DATA commands
EMAIL:
1 - enable E-Mail feature
0 - disable E-Mail feature
default is enabled
SMTPIP:XXXXX
defines SMTP server IPv4 address
example SMTPIP:"smtp.aol.com"
max length is 32
SMTPPORT:
defines SMTP server PORT
example SMTPPORT:2121
value must be a number, in range 0..
default is 25
APN:
defines GPRS APN (for E-Mails)
example APN:Internet
max length is 32
default is Internet
APNUSR:
defines GPRS USERNAME (for E-Mails)
example APNUSR:Patryk
max length is 32
default is empty
APNPWD:
defines GPRS PASSWORD (for E-Mails)
example APNPWD:Patryk
max length is 32
default is empty
SMTPUSR:
defines smtp username (used for authentication - this is not APN username!)