User's Manual

Revision: 01/1014  DOK 1652-us
Receipt of goods
Inspect the goods immediately upon receipt for completeness and possible transport damages!
Notify transport damages immediately to the forwarder and CeoTronics AG!
Transport and storage
Make sure the environmental conditions specified in the technical data sheet are met and complied with in transit, at the
storage location and site of operation! Take appropriate measures to avoid vibration, impacts and drops! Choose adecuate
packaging when dispatching the device. Store the device after cleaning it in an appropriate dry place at constant ambient
conditions. Avoid extreme temperature fluctuation!
Safe disposal of packaging material
Danger of ingestion and choking!
Packaging materials, e.g. filling materials and plastic bags are not toys and have to be kept out of the reach
of children. There is a risk of children ingesting them and choking!
Dispose of packaging material in an environmentally responsible way!
CT-WirelessPTT Standard
1
The LED illuminate by pressing of C1.
CT-WirelessPTT MIL
2
The LED illuminates during sending and can show the channel
assignment of the large button (C1/C2). For check press S (with
an appropriate “blunt” tool) until the LED illuminates.
1 x illuminate – C1
2 x illuminate – C2
For change the channel press S until the LED illuminate.
– then press in the time of 3 seconds the button again. The
assignment is displayed.
In order to prevent the LED lights up when you press the buttons,
press the S button for more than 5 seconds until the LED lights
up. For switch ON press S again for more than 5 seconds until
the LED lights. During the pressing is displayed first the channel
assignment of the large button (C1/C2).
C4
C3
C1oder C2
LED
S
C1
LED