User's Manual
Table Of Contents
- Contents
- 1 Warning - and Safety instructions
- 2 Abbreviations and Terms
- 3 Scope of delivery
- 4 Labeling of the product
- 5 Product description
- 6 Preparing the Product for Use
- 7 Operating Instruction
- 7.1 Change of the battery
- 7.2 Connect the CT-MultiPTT Bluetooth to the radio
- 7.7 Telephone mode (mode 1)
- 7.8 Telephone mode with MIC switch (mode 2)
- 7.9 Limited telephone mode with MIC switch (mode 3)
- 7.10 Increase the volume
- 7.11 Lower the volume
- 7.12 Battery status
- 7.13 Change the PIN for CT-Multi PTT Bluetooth
- 7.14 CT-Wireless-PTT (optional)
- 7.15 Subscribe the CT-Wireless-PTT to the CT-Multi PTT Bluetooth
- 7.16 Delete one CT-Wireless-PTT from the memory of the CT-Bluetooth Adapter
- 7.17 Delete all CT-Wireless-PTT from the memory of the CT-Bluetooth Adapter
- 7.18 Switch-on and operation
- 7.19 End of operation
- 8 Safekeeping – storage
- 9 Disposal
- 10 Technical data
- 11 Brief instruction
Revision: 02/1015 DOK 1643-us 3 of 28
7.18 Switch-on and operation ........................................................................................................ 24
7.18.1 Communication via radio ................................................................................................. 24
7.18.2 Communication via cellular phone .................................................................................. 24
7.19 End of operation..................................................................................................................... 25
8 Safekeeping – storage .................................................................................. 25
8.1 Cleaning ................................................................................................................................ 26
9 Disposal ........................................................................................................ 26
10 Technical data .............................................................................................. 26
11 Brief instruction ............................................................................................. 27
1 Warning - and Safety instructions
Notice for the use of the device for prevention of personal injury or property damage the national safety
and accident prevention regulations and the following warning and safety instructions in this instruction
manual.
The following information-, warning- and safety symbols can be used:
This symbol indicates important information.
This symbol indicates a possibly dangerous situation. Non-observance of the safety
instruction could cause damage to property.
This symbol indicates a possibly dangerous situation. Non-observance of the safety
instruction could cause minor or moderate injuries.
This symbol indicates a possibly dangerous situation through electric current. Non-
observance of the safety instruction could cause minor or moderate injuries.
This symbol indicates a potential situation of danger. Non-observance of the safety
instruction could cause death or extremely severe injuries.
This symbol indicates a potential situation of danger through electric current. Non-
observance of the safety instruction could cause death or extremely severe injuries.
This symbol indicates imminent danger. Non-observance of the safety instruction
could cause death or extremely severe injuries.
This symbol indicates imminent danger through electric current. Non-observance of
the safety instruction could cause death or extremely severe injuries.
All warning and safety symbols may include pictograms, calling the attention clearly to the
danger involved.
1.1 General safety instructions
Before using CeoTronics products read completely the appropriate operating
instructions. If in doubt, ask our technical staff.
Keep these operating instructions for later use.
If repair work of any kind needs to be done to CeoTronics products, arrange for it to
be performed only by the company CeoTronics or by a specialized workshop that is