User's Manual
Table Of Contents
- Contents
- 1 Warning - and Safety instructions
- 2 Abbreviations and Terms
- 3 Scope of delivery
- 4 Labeling of the product
- 5 Product description
- 6 Preparing the Product for Use
- 7 Operating Instruction
- 7.1 Change of the battery
- 7.2 Connect the CT-MultiPTT Bluetooth to the radio
- 7.7 Telephone mode (mode 1)
- 7.8 Telephone mode with MIC switch (mode 2)
- 7.9 Limited telephone mode with MIC switch (mode 3)
- 7.10 Increase the volume
- 7.11 Lower the volume
- 7.12 Battery status
- 7.13 Change the PIN for CT-Multi PTT Bluetooth
- 7.14 CT-Wireless-PTT (optional)
- 7.15 Subscribe the CT-Wireless-PTT to the CT-Multi PTT Bluetooth
- 7.16 Delete one CT-Wireless-PTT from the memory of the CT-Bluetooth Adapter
- 7.17 Delete all CT-Wireless-PTT from the memory of the CT-Bluetooth Adapter
- 7.18 Switch-on and operation
- 7.19 End of operation
- 8 Safekeeping – storage
- 9 Disposal
- 10 Technical data
- 11 Brief instruction
Revision: 02/1015 DOK 1643-us 22 of 28
7.16 Delete one CT-Wireless-PTT from the memory of the CT-Bluetooth Adapter
1. Switch the CT-Multi PTT Bluetooth off, if it is on.
2. Press all three (3) lateral buttons of the CT-Multi
PTT Bluetooth simultaneously until the LED in the
Bluetooth button starts flashing three (3) times red-
green. The LED keeps flashing red-green until you
let the buttons go, however minimum three times.
3. Press the Bluetooth key of the CT-Multi PTT
Bluetooth and hold it down for at least two (2)
seconds. Now the deletion mode is active.
- in deletion mode the LED flashes very quickly
To abort deletion mode, press the Bluetooth key
briefly once again.
4. Now, press the PTT button of the CT-Wireless-PTT
you want to delete and hold it down until the LED
starts glowing for four (4) seconds. This deletes the
transmitter code.
5. Then, press the Bluetooth key of the CT-Multi PTT
Bluetooth one time. The LED is not glowing
anymore. Now you can change to operating mode
(6.) or apply (3. and ff.) of 7.15 / 7.16 / 7.17.
6. Change to operating mode of the CT-Multi PTT
Bluetooth by pressing for at least one (1) second
both, the Volume-up” and “Volume-down” keys - like
changing operating modes.
Figure 26
Bluetooth-
key
Volume-up
key
Volume-down
key