User's Manual
Table Of Contents
- Contents
- 1 Warning - and Safety instructions
- 2 Abbreviations and Terms
- 3 Scope of delivery
- 4 Labeling of the product
- 5 Product description
- 6 Preparing the Product for Use
- 7 Operating Instruction
- 7.1 Change of the battery
- 7.2 Connect the CT-MultiPTT Bluetooth to the radio
- 7.7 Telephone mode (mode 1)
- 7.8 Telephone mode with MIC switch (mode 2)
- 7.9 Limited telephone mode with MIC switch (mode 3)
- 7.10 Increase the volume
- 7.11 Lower the volume
- 7.12 Battery status
- 7.13 Change the PIN for CT-Multi PTT Bluetooth
- 7.14 CT-Wireless-PTT (optional)
- 7.15 Subscribe the CT-Wireless-PTT to the CT-Multi PTT Bluetooth
- 7.16 Delete one CT-Wireless-PTT from the memory of the CT-Bluetooth Adapter
- 7.17 Delete all CT-Wireless-PTT from the memory of the CT-Bluetooth Adapter
- 7.18 Switch-on and operation
- 7.19 End of operation
- 8 Safekeeping – storage
- 9 Disposal
- 10 Technical data
- 11 Brief instruction
Revision: 02/1015 DOK 1643-us 12 of 28
5.3.3 Use with standard ear plug
Figure 10
Figure 11
Figure 12
The standard earplug is used for adaptation of the ear microphone / earphone to the auditory canal. It is
»pushed« with a rotating motion onto the ear microphone / earphone (Fig.10). If no perfect seat inside
the ear is achievable, because the standard earplug is too large, the largest lamella ring can be cut off
with a sharp knife (figure 10-12).
6 Preparing the Product for Use
6.1 Receipt of Goods
Check incoming goods immediately upon receipt for completeness and/or
transport damage!
Inform the transport company and CeoTronics AG immediately of any transport
damages!
Risk of swallowing and choking!
Keep packing material, e.g. filler materials und plastic bags,
out of the reach of children; they are no toys!
Dispose of packing materials environmentally responsible!