User's Manual

9
2.5.2 Deleting one CT-Wireless-PTT from the memory of a wire-bound PTT
transmit button
1. Switch OFF the radio unit connected to the wire-bound PTT transmit button if it is in switched-on
state
2. Insert the CT-ClipCom ear microphones/earphones in the ears
3. Press the two keys (figure 9/d, e) of the wire-bound PTT transmit button
– Keep the keys depressed and switch the radio ON
– Continue keeping the two keys depressed until you hear a short beep in the RH CT-ClipCom ear
microphone/earphone
– After it, let the two keys go
4. Press the PTT key (figure 9/e) of the wire-bound PTT transmit button once and keep it depressed for
at least 1.6 seconds. The deletion mode is now activated.
– In deletion mode your hear a very fast tone sequence
– The deletion mode can be aborted by briefly pressing again the PTT key.
5. Now, press the PTT key for the CT-Wireless-PTT you want to delete and keep it depressed until you
hear a long tone lasting 4 seconds. The transmitter code is now deleted and you may release the
key.
2.5.3 Deleting all CT-Wireless-PTTs from the memory of a wire-bound PTT
transmit button
1. Switch OFF the radio unit connected to the wire-bound PTT transmit button if it is in switched-on
state
2. Insert the CT-ClipCom ear microphones/earphones into the ears
3. Press the two keys (figure 9/d, e) of the wire-bound PTT transmit button
– Keep the keys depressed and switch the radio ON
– Continue keeping the two keys depressed until you hear a short beep in the RH CT-ClipCom ear
microphone/earphone
– After it, let the two keys go
4. Press the PTT key (figure 9/e) of the wire-bound PTT transmit button once and keep it depressed for
at least 1.6 seconds. The deletion mode is now activated.
– In deletion mode your hear a very fast tone sequence
– The deletion mode can be aborted by briefly pressing again the PTT key.
5. Press now once more the PTT key of the wire-bound PTT transmit button for more than 1.6 seconds.
As soon as you hear a long tone lasting 4 seconds, all transmitter codes are deleted.
3. Commissioning and operation
a. Connect the ear microphones/earphones to the wire-bound PTT transmit button.
b. Place the necklace with the wire-bound PTT transmit button around your neck.
c. Inserting the ear microphone/earphone: Place the earhanger behind the ear. Insert the ear mould
into your ear with a quarter turn towards the back of the head until it has a snug fit. Adjust the seat of
the earhanger, if necessary.
d. Connect the wire-bound PTT transmit button with the connection plug to the radio or communication
device.
PLEASE NOTE
For connecting the PTT transmit button use only an adapter without keyload function. In case of
doubt, consult CeoTronics’ specialists.