User's Manual

7
Removing the earphone from the ear mould
a. Take the ear mould in one hand and press the
two ends of it against each other (figure 8)
until ear microphone "disengages" from the
ear mould.
ATTENTION!
Never extract the earphone from the ear mould
by pulling the cable.
b. Now hold the earphone with the other hand
and pull it out of the ear mould.
figure 8
2.4 Wired PTT-button
The PTT transmit button is provided with connecting cable and plug for connection to a radio unit
adaptor. The PTT transmit button and the optional CT-Wireless-PTT have equality of function. The
optional CT-Wireless-PTT must be subscribed to the wire-bound transmit button. Earphones/ear
microphones are available either with firm connection to the PTT transmit button or with plug-type
connectors.
figure 9 (example)
a Necklace
b Loop for adjusting the neck size
c Holding loop
d Holding loop
e Plug for connecting the RH CT-ClipCom earphone/ear
microphone (optional)
f Plug for connecting the LH CT-ClipCom earphone/ear
microphone (optional)
g Volume control for the ASR-microphone (option)
h PTT transmit button
i rear Fastening clip
j 12-pin plug for connection to a communication device
k cord stopper (option)