Integration Manual

Integration Manual
revision:
date:
author:
3
02.10.20
nh
Seite 2 von 3
End-product labeling requirements
FCC-Compliance
End products that have this CT-DECT Module M7 integrated must have a label containing at
least the information shown below:
Contains: FCC ID: L52CT-M7CEO1
The label must be affixed on an exterior surface of the end product such that it will be visible upon
inspection.
In accordance with 47 CFR § 15.19, the end-product shall bear the following statement in a
conspicuous location on the device:
"This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions;
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation."
When the device is so small or for such use that it is not practicable to place the statement above
on the end product itself, the information shall be placed in a prominent location in the instruction
manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in
which the device is marketed.