User's Manual

9
a Green push button „I“ to switch on the device
b Control lamp, illuminates if the device is swit-
ched on and if the mains adaptor attached
Illuminates green contin. UB > 3,65V
flashes green 1 hour operational
readiness
flashes red 30 minutes opera-
tional readiness
LED off UB ≤ 3,3V, no functi-
on
c Charging / warning lamp
Illuminates red contin. battery is charging
Illuminates green contin. battery full loaded
double flashes red battery is defect
time for charging is
exceeded without
achieving the
necessary power
d Red push button „O“ to switch off the device
e Subscription „1“ button for subscription of
max. four CT-DECT Multi Standard (PP) to
the CT-DECT Conference (4) (FP) „1“
f 9-pin plug for connection of accessory
(e.g. MP3 recorder)
g Subscription „2“ button for subscription of
max. four CT-DECT Multi Standard (PP) to
the CT-DECT Conference (4) (FP) „2“
h 3-pin plug for connecting the mains adaptor
or the Car Mains adaptor
i cover for sockets „f“ and „h“
j CT-DECT Conference (4) (FP) „1“;not part of
the scope of delivery
k GSM-phone; not part of the scope of delivery
l Power Supply with Li-/Ion battery
m CT-DECT Conference (4) (FP) „2“;not part of
the scope of delivery
n Car Mains adaptor and Mains adaptor with
power cord
o Two-way radio (Example), not part of the
scope of delivery
2.3 Description
The CT-DECT Case is the central unit for max. eight mobile CT-DECT Multi Standard (PP).
The CT-DECT Case realizes the following connections:
- wireless duplex-radio connection over short distances between e.g. max. eight CT-DECT Multi Stan-
dard (PP)
- radio connection to an external two-way radio
- GSM connection to the GSM network
A CT-DECT Interface is equipped with one digital transceiver module. One transceiver module can ad-
ministrate max. four CT-DECT Multi Standard (PP). Four CT-DECT Multi Standard (PP) can be as-
signed to one transceiver module. The CT-DECT Multi Standard (PP) must be subscribed at the CT-
DECT Conference (4) (FP).
The CT-DECT Case is equipped with a changeable CT-Power Supply with rechargeable Li-/Ion battery.
It supplied the CT-DECT Case with power. In the CT-Power supply is integrated an battery-/chargering
connection and an power converter 12 V – 3,7 V.