User's Manual

7
2.2 Overview CT-DECT Case
Basic Configuration
- one or two pluggable CT-DECT Conference (4) (FP) (Art. No.1410165; is not included in the scope of
delivery) for each four participants with CT-DECT transmitter-/receiver device standard
- one changeable Power supply with Li-/Ion battery (Art. No.0913024)
- one mains adaptor (Art. No.0913025)
- connector-and control panel at the outside of the CT-DECT Case
The CT-DECT Case is equipped with roles and an extendable handle.
Expandabilities (not included in the scope of delivery)
- GSM-phone
- two-way radio
The CT-DECT Conference (4) (FP) are not include in the scope of delivery of the CT-DECT
Case.
If you equipped the CT-DECT Case with one CT-DECT Conference (4) (FP), the case is useable for the
wireless communication with four mobile participants.
If you equipped the CT-DECT Case with two CT-DECT Conference (4) (FP), the case is useable for the
wireless communication with eight mobile participants.
The installation is described in section 7.1.
Figure 2 CT-DECT Case, closed
a Latch to unlock and lock the CT-DECT
Case
b Automatic purge valve for equalization after
changes in atmospheric pressure
c Rolls
d Hinged handle
e Extendable handle
f Hinged handle
g Lock for extendable handle