User's Manual

14
7. Installation and Uninstallation of the components CT-DECT Confer-
ence (4) (FP), GSM-phone and Two-way radio
7.1 CT-DECT Interface
Open the cover of the case for changing the CT-
DECT Conference (4) (FP).
Pull out the CT-DECT Conference (4) (FP) „1“ or
„2“ carefully and solve the plug connection.
To open the plug connection pull in direction of
arrow. Do not twist or break the plug connection.
Reinstall the new CT-DECT Conference (4) (FP)
in reverse order.
Make sure during the installation that you place
the plug connection in the storage space under
the CT-DECT Conference (4) (FP).
Figure 8
7.2 GSM-phone
Open the cover of the case for changing the
GSM-phone. Pull out the GSM-phone carefully
and solve the plug connections. The plug con-
nections can be different, depending on phone.
The phone is, depending on design, placed in a
tight-fitting foam adapter (Figure 9, arrow). The
phone can be pulled with the adapter out of the
case.
Pull the phone not to wide from the case, so that
it comes to no damages at the plug connections.
Reinstall the new phone in reverse order.
Figure 9 Example
7.3 Two-way radio
Open the cover of the case for changing the two-
way radio. Pull out the two-way radio carefully
and solve the plug connection. The plug connec-
tions can be different, depending on two-way
radio.
The two-way radio is, depending on design,
placed in a tight-fitting foam adapter (Figure 10,
arrow). The two-way radio can be pulled with the
adapter out of the case.
Pull the two-way radio not to wide from the case,
so that it comes to no damages at the plug con-
nections. Reinstall the new two-way radio in re-
verse order.
Figure 10 Example