User's Manual
Table Of Contents
- 1.Important safety instructions
- 2.Description
- 3.On-air subscription
- 4.Commissioning and operation
- 5.Safekeeping – storage
- 6.Recharging the batteries
- 7.Maintenance
- 8.Accessories and consumable parts
17
7. Maintenance
7.1 Visual inspection
Regularly examine the devices, the headset muffs, the ear cushions, the cables and plug connectors for
signs of fractures, cracks and wear. Send defective devices to CeoTronics for repair. Replace damaged
or worn ear cushions in accordance with section 7.4, and, even if not damaged, every 6 months of use
at the latest.
7.2 Cleaning
CAUTION
When cleaning ensure that no moisture penetrates inside the devices. Do not use any solvents
(e.g. benzine, alcohol, etc.) for cleaning purposes !
Remove any loose dust with a soft brush. Clean, if necessary, the outside of the devices with a suitable
clean cloth that has been slightly moistened with clear water, and rub the parts dry afterwards. If heavily
soiled, some dishwashing liquid can be used in addition.
7.3 Replacing the windshield on the
headset microphone
Pull the windshield (Fig. 12/a) off the microphone
and replace it.
7.4 Replacing the ear cushions of the
headset muffs
Pull the ear cushion (Fig. 12/b) off the headset
muff and replace it. Ensure that the new ear
cushion fully engages.
Fig. 12
8. Accessories and consumable parts
Designation and description Art. No.
Carrying case for headset, color grey 40 35 030
Ear cushion, 2 pcs. 50 00 501
Windshield for microphone, 10 pcs. 50 02 201
Comfort set consisting of 50 pcs. (25 pair-pack) sweat absorbing cotton pads 40 10 025