User's Manual

10
Fig. 8 Transmitter/Receiver Headset
CT-GateCom II.24, microphone
on/off switch (item »a«)
On/Off switch for the microphone
The microphone can be switched on and off with the switch
»Mic.–OFF–Mic.« (Fig. 8/a) at the bottom of the right-hand
headset muff. Three switch positions are possible.
Middle position »OFF« (receive): The headset
microphone is switched off. You can only receive.
Front switch position »Mic.« (transmit and receive):
The headset microphone is switched on. You can speak
into the microphone as long as you hold the switch in this
position and at the same time you can hear a received
message. After releasing the switch the switch returns to
the middle position »OFF«.
Rear »fixed« switch position »Mic.« (transmit and
receive): The headset microphone is constantly switched
on. You can speak into the microphone and at the same
time you can receive a message.
Fig. 9 Transmitter/Receiver Headset CT-GateCom II.24,
battery charging socket
Power supply
A 3.6 V/600 mAh NiCd rechargeable
battery or an optional 3.6 V/2300 mAh
Li-Ion rechargeable battery in the right
headset muff provides the power supply for
the headset.
The battery charging socket (see example
Fig. 9/a) is located on the rear of the right-
hand headset muff.
2.7 Aircraft Interface CT-GateCom II.24+4
The Aircraft Interface (Fig. 10) consists of Interface (Fig. 10/j) and Battery Pack (Fig. 10/c) which reside
in a carrying bag (Fig. 10/a). The carrying bag is closed by means of a zip. The unit is connected to the
aircraft intercom via connecting cable and male jack-plug (Fig. 10/k).
The Battery Pack contains a Li-Ion rechargeable battery 3.6 V/2300 mAh. It supplies the power for the
Interface. The Battery Pack can be charged via the charging socket (Fig. 10/d).
The weatherproof carrying bag is used to stow the Interface and the Battery Pack and can be attached
to the aircraft, e.g. the access cover for the aircraft intercom, by means of the carrying strap or a hook.
Î NOTE
z
Keep the carrying bag closed when in use.