User's Manual

2
Introduction
This user manual is an example and describes the CeoTrionics Aircraft Interface
– that contains the Transceiver Module CT-DECT-I24 – in conjunction with 4 CeoTronics
Transmitter/Receiver Units CT-GateComII.24/Multi provided with CT GroundCom
Headsets.
Important Note
Please note that any changes or modifications not expressly approved by the party
responsible for compliance will void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that cause undesired operation.
Declaration concerning RF Radiation Exposure:
The CT-GateCom II.24 contains the transceiver module CT-DECT-I24. The system is
considered to be a mobile transceiver. The safety distance between the mobile device and any
human person must be 20 centimeters (7.9 in.).
1. Important safety instructions
When using CeoTronics products do not fail to comply with the following safety
information:
z Before using CeoTronics products read completely the appropriate operating instructions. If in doubt,
ask our technical staff.
z If repair work of any kind needs to be done to CeoTronics products, arrange for it to be performed
only by the company CeoTronics or by a specialized workshop that is authorized by CeoTronics. In
all other cases our warranty and liability for the product shall lapse.
z If products are operated on a mains voltage, always pull the mains plug out of the mains plug socket
before opening such products (e.g. for servicing purposes) !
z Do not store CeoTronics products outside or in damp ambient conditions. At all times keep them
clean, dry and at normal air humidity. CeoTronics products must not be stored in areas with a
temperature of over +80° C (+176° F), e.g. in the summertime on the parcel shelf of a car. If not
stated otherwise, the following temperature ranges are allowed for CeoTronics products: -10 to
+55° C (+14 to +131° F) for operation, -40 to +80° C (-40 to +176° F) for storage.