Specifications

CENTURY SWIFT 100% RTF

EXPLODED VIEW DIAGRAMS

Tail Belt Drive

(CN531)

Tailboom

(CNE532)

M3 Locknut

Lower Transmission Case

(CNE542)

M4x4 Set Screw

Bearing 4x10x4

(CNBB4102)

Transmission Gear

(CNE533)

M3x4 Set Screw

Upper Transmission Case

(CNE542)

M3x10 Cap Screw

(CNM3x10CS)

M4x30 Pin

(CNE533)

Brass Spacer

M4x6x.25

(CNLR1006)

Brass Spacer M4x6x.25

(CNLR1006)

Do not over tighten

Note: Straighten the belt inside the tailboom, rotate the belt 90-

degree counter clockwise. Assemble the transmission gearbox,

do not tighten at this point. Attach the tailboom assembly to the

main frame and secure it in place. Properly mesh the main gear

and the transmission gear. Pull the tailboom outward to achieve

the desired belt tension, evenly tighten the transmission screws.

Tail Transmission Assembly

Do not over tighten

Tail Drive Belt Orientation

P.30