Specifications

P.12
CENTURY SWIFT 100% RTF
Use the hook and loop material for mounting the Li-Po battery located underneath the front tray, below the ESC (Electronic Speed Con-
trol) be sure that the battery wires align with the ESC wire. As show in the picture.
Once the battery has been properly positioned, fasten the hook and look strap around the battery for added security.
Although each Century Swift 100% RTF model is control tested at the factory, it is a good idea to test the controls prior to the first
flight to ensure none of the servos, linkages or other parts were damaged during shipping and handling.
Before proceeding, disconnect the three bullet connectors between the motor and ESC. It is not safe to perform the control test with
the motor connected to the ESC.
PREPARING THE CHECKLIST
Lower the throttle/collective (left-hand) stick completely then turn the transmitter on.