Instruction manual

*DO NOT OVER TIGHTEN THE SCREWS
Re-torque all the screws once the tailboom is
mounted to the mainframe during fi nal assembly
Main Frame Assembly
6. Assembly Instructions
Electronics Tray
(CNE506)
Self Tapping
Screw M3x8
(CNM3x8ST)
Linkage Ball (CNLR1014)
Cap Screw M3x6
(CNM3x6CS)
M3 Locknut
*Place locknuts
as shown
Cap Screw M3x20
(CNM3x20CS)
Cap Screw M3x25
(CNM3x25CS)
Cap Screw M3x10
(CNM3x10CS)
Canopy Stand Off 27mm
(CNE501)
Motor Mount Block
(CNE504)
Cap Screw M3x6
(CNM3x6CS)
Upper Bearing Block
(CNE507)
Anti-Rotation Bracket
(CNE506)
Upper Bearing
(CNBB1019)
Upper Shaft Collar
(CNE511)
Set Screw M4x4
(CNM4x4SS)
M3 Locknut
Canopy Stand
Off 25mm
(CNE501)
Cap Screw M3x8
(CNM3x8CS)
Cap Screw M3x16
(CNM3x16CS)
Bearing 3x6x2.5 (CNBB36)
Linkage Ball (CNLR1020)
CCPM Bell Crank (CNE502)
Spacer M3x5x2 (CNE502)
Bearing 3x6x2.5 (CNBB36)
Cap Screw M3x18 (CNM3x18)
Washer M3x5x.5 (CNLR1003)
THREAD LOCK
B
THREAD LOCK
B
Main Gear
(CNE510A)
Auto-rotation Hub and Bearing
(CNE510B)
Flush Head Cap Screw
(CNM3x8FHCS)
Main Shaft
(CNE508)
M3 Lock Nut
Lower Shaft Collar
(CNE509)
Cap Screw
(CNM3x20CS)
Anti Rotation Bracket
(CNE506)
Main Gear with
Auto-rotation Hub
(CNE510)
THREAD LOCK
B
Lower Shaft Collar
(CNE509)
9.