Installation manual

Page 44
2.1.1. Leaf Delay Status
Leaf Delay Value2.2.1.
5.2 Leaf delay
5.2. Pre-open delay
5.3. Pre-close delay
5.4 Opening speed
5.5. Closing speed
5.6. Ramp-up distance
5.7. Ramp-down distance
5.8. TRG stop distance
5.9. IRB stop distance
5.10. Crawl distance
5.11. Torque limit
7. Pedestrian
7.1. Pedestrian open position
7.2. Pedestrian autoclose time
7.3. Pedestrian pre-open delay
7.4. Pedestrian pre-close delay
6. Infrared beams
6.1. PIRAC control
6.2. IR beam test
6.3. IRBO=IRBC on
closing
6.4. IR beam alarms
6.1.1. PIRAC status
6.1.2. Stop on open
6.2.1. Status
6.2.2. Test beam
6.4.1. Ambush alarm
6.4.2. Break-in alarm
status
6.4.3. Alarm output
6.1.2.1. Stop on
open status
6.1.2.2. Stopping
distance
6.4.1.1. Ambush
alarm status
6.4.1.2. Broken IRB
time
Pedestrian Open Position: 7.1
Pedestrian Autoclose Time: 7.2
Pedestrian Pre-Open Delay: 7.3
Pedestrian Pre-Close Delay: 7.4
Lock Enabled Status: 8.1
Lock Type: 8.2
Release Time: 8.3
Pre-Release Time: 8.4
Lock Location: 8.5
Lock Drive (AC/DC): 8.6
Courtesy Light Time: 9.1
Light Profile: 9.2
Operating Standard: 10.1
Reset Options: 10.2
Diagnostic Screen Status: 10.3
Test Button Disabled Status: 10.4
Press Master Button
If menu locked
ADD Remotes: 11.1
DELETE Remotes: 11.2
EDIT Remotes: 11.3
Remotes Menu Locked Status: 11.4
Courtesy Light
Pre Flash A
Pre Flash B
Pre Flash C
Factory Default: 10.2.1
Delete All Remotes: 10.2.2
Reset All: 10.2.3
Delete Remote By ID: 11.2.1
Delete Remote Button: 11.2.2
Delete Remote By Button: 11.2.3
Delete All Remotes: 11.2.4
PEDESTRIAN: 7
GATE LOCK: 8
COURTESY LIGHT: 9
GENERAL: 10
REMOTES: 11
§ Refer to Table 1 on page 39 for Schedule of Factory Defaults for each feature.
8. Gate lock
8.1. Lock Enabled Status
Lock Type
Release Time
Pre-Release Time
Lock Location
Lock Drive (AC/DC)
8.2.
8.3.
8.4.
8.5.
8.6.