Installation manual

Page 31
10. Determine gate swing angle
1. Close the gate and measure a distance of
1m from the centre-line of the gate hinge.
2. Make a mark on the ground.
1m
Use this procedure to accurately determine the gate opening angle:
3. Open the gate and measure a distance
along the gate a distance of 1m from the
centreline of the gate hinge.
4. Make a mark on the ground.
5. Measure the distance on the ground
between the two marks (Z).
6. Using this Z value, read off the gate
opening angle from the table below.
Step 1
Step 2
Step 3
Use gate swing angle of
60°
70°
80°
90°
100°
110°
120°
Value z from
1 000mm
1 075mm
1 218mm
1 351mm
1 474mm
1 587mm
1 687mm
To
1 075mm
1 218mm
1 351mm
1 475mm
1 587mm
1 687mm
1 732mm
1m
Z
FIGURE 48
FIGURE 49