Installation manual

6. Required tools and equipment
!
Spanner - 17mm, 15mm, preferably socket set
!
Crimping tool and pin lugs
!
Hammer
!
Electric drilling machine
!
20mm hole saw
!
Screwdrivers - 6mm Philips, 3.5 Flat
!
Pliers
!
Connector block
!
2 x G-clamps
!
Masonry Bits - 12mm; 10mm for wall mount brackets; steel bits 6.5mm/10.5mm
!
6mm Pin punch
!
Angle Grinder
!
Measuring tape
!
Hacksaw
!
5mm Allen key
!
Welding machine (including consumables and safety equipment
!
Soldering iron
!
Spirit level
!
Extension cord
!
Marking pen/chalk
!
Safety equipment (goggles, gloves, etc.)
Page 14