User guide

INTERCOM PUSHBUTTON
Visitor outside gate requests entrance. Gate opened from intercom pushbutton
inside house.
Most automatic gate installations are fitted with an intercom which provides for
communication between the house and the gate. The intercom handset is usually
provided with a "Gate or Door Release" pushbutton which, when pressed, sends a
signal to the gate controller to open the gate.
The sequence of operation of this pushbutton is identical to the radio transmitter
described under "Radio Transmitter".
PEDESTRIAN KEYSWITCH (OPTIONAL)
The pedestrian keyswitch is fitted to the gate pillar. It's purpose is to open the gate a
limited amount for pedestrians.
- Fit key into keyswitch and turn key
clockwise as though starting a motor
car.
- Let key spring back to rest position
and remove key immediately.
To allow time for removal of the key,
there is a 5 second delay before the
gate begins to open. If the courtesy
light is connected to the control card it
will flash five times, indicating that the signal has been accepted.
PRESS TO
OPEN GATE
CENTURIONCENTURION
Centurion Sliding Gate Operators User Guide - 7