User guide

The gates can be opened or closed in the following way:
RADIO TRANSMITTER
A handheld radio transmitter, carried in the motor car, sends a coded signal to the
receiver mounted in the control enclosure to open or close the gate.
- Press once for approximately 1 second to get the gate into motion.
If the transmitter is pressed while the gate is either opening or closing the gate will
immediately stop. Pressing the button again will cause the gate to reverse.
If the automatic closing facility has been selected and the gate is closing
automatically when the transmitter is pressed, the gate will stop and stay in that
position. Pressing the button again will cause the gate to reopen. If the gate is
opening with the automatic closing facility selected, and the transmitter is then
pressed, the gate will stop. The gate will close automatically after the autoclose
delay time.
REVERSING MODE: The system offers an alternative mode of operation to the
above. Referred to as reversing mode, if the transmitter is pressed while the gate is
moving, the gate will automatically reverse direction. The gate can never be left in
mid position with this mode selected.
Normal Operation
CENTURIONCENTURION
6 - Centurion Sliding Gate Operators User Guide