Specifications

page 20
features
and
functions
5.1.13. External Gate Status Indication
FIGURE 28
Off Gate is closed
On Gate is partially or fully open
Continuous slow flash Gate is opening
Continuous fast flash Gate is closing
One flash every two seconds Courtesy (Pillar) lights on
Two flashes every two seconds No mains present
Three flashes every two seconds Battery voltage is low
Four flashes every two seconds Multiple collisions have occurred
A LED (Light Emitting Diode)
mounted on your intercom
allows you to view the position
of your gate and the condition of
the battery and power supply
from the safety of your home.
The different signals of the LED
are described below:
If you choose not to fit a Gate Status Indicator, the Status LED
on the controller can also be used for trouble-shooting.
5.1.14. Courtesy (Pillar) Light Timer (optional feature)
FIGURE 29
Courtesy (Pillar) Lights can be
connected through the controller
if a 220V power supply is
available at the gate. The lights
will switch on every time the
gate is given a signal to operate
and stay on for an adjustable
period of one second to ten
minutes (in increments of one
second) then automatically turn
off.
The purpose is to bathe your entrance with light when you open the
gates and increase your security as you drive into your property – it
also saves electricity as the lights only come on when you use the gate
motor.
Using the Pedestrian Opening feature will cause the Courtesy (Pillar)
Lights to flash three times before the gate opens.