Specifications

5.1.6. PIRAC Mode (Beam Autoclose Mode) - optional
This mode can only be used if a Closing Safety Beam (page
18) is fitted.
This mode can be used in
conjunction with any of the
operating modes, Standard,
Condominium and Reversing.
With PIRAC Mode enabled, your
gate will close as soon as you
have driven through and passed
the safety beam – giving
intruders no time to follow
behind you.
If Autoclose is enabled and the
gate has been opened but
nothing moves through the
Closing Safety Beam, the gate
will stay fully open for the
duration of the Autoclose timer
before closing. However, if
something passes through the
Closing Safety Beam the gate
will close immediately.
If something crosses the beam
while the gate is opening, it will
continue to open until the beam
is cleared and the gate will then
stop and close. If the gate has
reached its fully open position, it
would stop and remain open
until the beam is cleared.
PIRAC mode’s ‘stop on opening’
configuration will open the gate
a short, adjustable distance past
the point at which the beam was
broken and stop, wait for the
beam to be re-made or the
Autoclose timer to expire, then
close.
FIGURE 18
FIGURE 19
FIGURE 17
page 14
Features
and
functions