User guide

Customising
the
features
and
functions
FIGURE 60
J. Setting the Operating Profiles
Three Operating Profiles, Positive Close Mode, Speed and Collision
Sensitivity, can each be configured depending on your individual
requirements.
J1. Positive Close Mode
Step 1: Rotate the Function Dial
to the PROFILE position (E).
Step 2: Rotate the Setting Dial
to PCM on/off along the ‘E’ row
of options.
Step 3: Press the pushbutton to
toggle the chosen mode
between On and Off.
The Status LED will change from
red to green indicating that the
selected Positive Close Mode has
been activated, or it will change
to red indicating that it has been
de-activated.
FIGURE 59
Step 4: Return the Function
Dial to the RUN position.
FIGURE 61
page 28