User guide

Customising
the
features
and
functions
Step 3: Press the pushbutton to
select the setting.
The Status LED will change from
red to green indicating that the
Open Only Mode has been
activated.
FIGURE 48
Step 4: Return the Function
Dial to the RUN position.
FIGURE 49
G3. Reversing Mode:
Step 1: Rotate the Function Dial
to the MODE position (D).
Step 2: Rotate the Setting Dial
to the REVERSING selection
along the ‘D’ row of options.
Step 3: Press the Pushbutton to
select the setting.
The Status LED will change from
red to green indicating that the
Reversing Mode has been
activated.
FIGURE 50
Step 4: Return the Function
Dial to the RUN position.
FIGURE 51
FIGURE 52
PIRAC Mode can be active while in Standard Mode, if desired.
PIRAC Mode can be active while in Standard Mode, if desired.
page 25