Spec Sheet

731.9
[28.8]
637.6
[25.1]
LEFT SIDE VIEW
642
[25.3]
76.2 [3.0]
PEA GRAVEL
MINIMUM
TRANSFER
SWITCH
8KW - 17KW
(IF SUPPLIED)
TRANSFER
SWITCH
20KW
(IF SUPPLIED)
1218
[47.9]
FRONT VIEW
1226
[48.3]
H2
H1
W1
W2
H2
H1
W1
W2
Standby Generator - 20 kW
Design and specifications subject to change without notice. Dimensions shown are approximate. Contact your Generac dealer for certified drawings. DO NOT USE THESE DIMENSIONS FOR INSTALLATION PURPOSES.
TRANSFER SWITCH & PRIORITY LOAD CENTER Model 05813 (20 kW)
No. of Poles 2
Current Rating (amps) 200
Voltage Rating (VAC) 250
Utility Voltage Monitor (fixed)
-Pick-up
-Dropout
75%
65%
Return to Utility approx. 15 sec.
Exerciser weekly for 12 minutes Standard
UL Listed Standard
Dimensions (H” x W” x D”) 20 x 15.2 x 7.3
Circuit Breaker Protected
Available RMS Symmetrical
Fault Current @ 250 Volts 22,000
Transfer Switch Features
• Electrically operated,
mechanically-held contacts for
fast, positive connections.
• Rated for all classes of load,
100% equipment rated, both
inductive and resistive.
• 2 pole, 250 VAC contactors.
• 160 millisecond transfer time.
• Dual coil design.
• Main contacts are silver plated
or silver alloy to resist welding
and sticking.
• NEMA 3R (Outdoor rated)
enclosure is standard on the
200 amp switch.
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • centuriongenerators.com
©2009 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0182070SBY/Printed in U.S.A. 04.09