Specifications

18
BU
BT
10
Push the side burner valve stem (BF) and mount it by using screws
and washers included on the valve bracket, threading through the
side burner control panel. Affix the bezel (BU) onto the value stem
using hardware provided.
Push the knob (BT) onto the valve stem with the arrow on the knob
pointing upwards.
Insert the side burner (DB) into the frame and attach #6, #7 and #8 it to
the side burner bracket using hardware #6, #7, and #8 (x2) as shown.
Gently slide the burner tube over the orifice of the valve. Then
place the side burner cooking grate (DD) as shown.
11
Remove the screws and washers from the door handles (CG) and
assemble the handles to the left and right door (CI & CH) by using
the same hardware provided on the door handles. Insert the grease
tray (CJ) into the upper rail (CK) as shown.
Fig. 10
Fig. 11
Fig. 12
12
Assemble the cart back panel (CC) to the back side of the cart by
using hardware #1, #3, and #4 (x4).