Specifications

Insert the left and right grease tray bar (CE & CF) into the holes of

upper rail (CK) as shown. Assemble the upper rear panel (BS) to the

burner box and cart assembly using hardware #1, #3, and #4 (x4).

Fix the upper rear panel (BS) to both grease tray rails (CE & CF) and

heatshield (CD) using hardware #9 (x4) as shown.

Assemble the tank heat shield (CD) into the upper rail (CK) next to the

2 grease tray bars by using hardware #9 (x2) as shown.

Remove the screws and washers from towel bar (DH). Assemble the

towel bars (DH) to the side shelf (DF) by using the hardware removed.

Assemble the side burner shelf (DA) to the burner box assembly by

using hardware #2, #3, and #4 (x3) to fit the 3 holes at the back

part of the left upper panel (BB) as shown.

Use #6, #7, and #8 (x2) to attach the side burner shelf (DA) to 2

front holes of the left upper panel (BB).

Assemble the side shelf (DF) to the upper right panel (BC) by using

the same hardware.

Fig. 8

Fig. 9

Fig. 7