Specifications

14
5
Open lid (A) and position the three flame tamers (BF) above the
burners (BD) as shown. Place the two cooking grates (BG) above
the flame tamers.
4
Assemble the upper brace (CH) below the control panel (CE) as
shown using hardware #6,#7 and #8 (x4).
Fig. 4
Fig. 5
6
Attach the warming rack (BI) to the inside of the Burner Box as
shown. Make sure to insert the front 3 bars into the 3 holes of the
burner box rear panel (BH). Place the two legs of the warming rack
clip onto the edge of burner box weldment (BA).
Fig. 6