CENTRO 4900IR Assembly Manual 85-3014-8 (G51208) Propane 85-3015-6 (G51211) Natural Gas LIMITED 5-YEAR WARRANTY Read and save manual for future reference. Assemble your grill immediately. Missing or damaged parts should be claimed within 30 days of purchase. For product inquiries, parts, warranty and troubleshooting support, please call 1-877-707-5463.
HARDWARE PACK TOOLS NEEDED FOR ASSEMBLY • #2 Phillips screwdriver (Long and short) • ¼” Slotted screwdriver (Long and short) • Adjustable wrench • Pliers H E AV Y A R T I C L E N E E D S 2 TO L I F T THIS MANUAL MUST REMAIN WITH THE PRODUCT AT ALL TIMES To ORDER non-warranty replacement parts or accessories, or to register your warranty, please visit us on the web at www.centrobbqs.com. CAUTION DANGER Sharp edges. Wear gloves when assembling your grill. 1. If you smell Gas: a.
PARTS LIST (PROPANE) FOR 85-3014-8 (G51208) Item Qty. Description Part No. Item Qty. Description EXPLODED DIAGRAM (PROPANE) FOR 85-3014-8 (G51208) Part No.
PARTS LIST (NATURAL GAS) FOR 85-3015-6 (G51211) Item Qty. Description AA 1 Part No. Item Qty. Description EXPLODED DIAGRAM (NATURAL GAS) FOR 85-3015-6 (G51211) Part No.
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 1 Seperate the 2 different types of wheels, 2 locking wheels (EH) and 2 regular wheels (EI). EI Attach the locking wheels (EH) to the back of the bottom shelf (EG) and the regular wheels (EI) to the front of the bottom shelf (EG). EH 3 Attach the front brace (CL) to the Left and right cart side panels (EA and EB) CL TIP: One person should align the left side, while the second person assembles the right side.
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 5 THIS STEP REQUIRES 3 OR MORE PEOPLE. DO NOT ATTEMPT ALONE. EXTREMELY HEAVY. A + B 7 Attach the right side shelf fascia (DK) to the right side shelf table (DJ), as shown. a. Position the top lid and burner box assembly (A and B) onto cart assembly (C) as shown. b. Use the hardware to connect both parts, on the left and right sides, at the three points indicated in figure B and C.
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 9 Front a. Attach the left shelf fascia (DB) to the left side shelf table (DA). 11 YOU WILL NEED: 66 Remove the hardware that is pre-assembled to the side burner valve bracket(CC), as shown in figure A. Insert the side burner valve stem through the rear of the left side shelf fascia(DB). Assemble the side burner valve (cc) to the side shelf fascia (DB), using the hardware removed.
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 12 a. Position the Sear Zone burner (DD) through the opening in the left side shelf (DA). 12 e. Attach the end of the side burner electrode wire (DE) to the underside of the side burner electrode, as shown in figure E. Ensure that the wire is pushed in firmly. DE DD A E DA b. Make sure that the Sear Zone burner (DD) engages the Sear Zone burner valve (CC), gas jet, as shown in figure B. DD CC f.
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 14 TIP: Before attempting to assemble the door (EF) to the right pillar (ED), locate the two clasps on the door hinge. Next, locate the two small openings on the right side pillar (ED). 15 Place the flame tamers (BG) into the burner box. BG a. Hold the door (EF) perpendicular to the BBQ Cart. Align the two clasps on the door hinge (EF), with the two holes on the right side pillar (ED).
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS 17 a. Insert the grease tray (CM) into the opening in the upper back panel (CO), making sure to engage tracks located under burner box. 19 FOR PROPANE MODEL ONLY. For natural gas model, follow step 20. a. Position the 20 lb propane tank onto the bottom shelf (EG), and secure using the bolt (already attached) located on the underside of the bottom shelf, as shown in figure B. b.
