Instruction manual

16 17
Changing the Open Code 1
Changing the Open Code 2
Changing the Programming Code
TheOpenCode1ismainlyusedasamethodtoquicklytesttheLockStrikeRelayduringinstallation.
The Default factory Setting for the Open Code1 is2580. Whenthe rstuser isadded tothe
controller,thedefaultOpenCodewillautomaticallybedeleted,readyforanewOpenCode1to
bere-entered.
1)EnterProgrammingMode
2)Press“1”toenterMenu 1
 •TheModeLEDwillturnred
3)Enterthenew4-digitcodeyouwishtosetasOpenCode1
4)SystemreturnstoNormalMode
 •Youwillhear3beeps
 •TheDoorLEDwillturnoff
 •TheModeLEDwillturngreen
Note: -OpenCode1doesnotfunctioninSecureMode.
 -WrongentrieswillreturnthecontrollertoNormalMode.
 -Code0000willeraseanddeactivatetheOpenCode.
1)EnterProgrammingMode
2)Press“2”toenterMenu 2
 •TheModeLEDwillturnorange
3)Enterthenew4-digitcodeyouwishtosetasOpenCode2
4)SystemreturnstoNormalMode
 •Youwillhear3beeps
 •TheDoorLEDwillturnoff
 •TheModeLEDwillturngreen
Note: -OpenCode2doesnotfunctioninSecureMode.
 -WrongentrieswillreturnthecontrollertoNormalMode.
 -Code0000willeraseanddeactivatetheOpenCode.
1)EnterProgrammingMode
2)Press“3”toenterMenu 3
 •TheModeLEDwillturngreen
3)Enterthenew4-digitcodeyouwishtosetasProgrammingCode
4)SystemreturnstoNormalMode
 •Youwillhear3beeps
 •TheDoorLEDwillturnoff
 •TheModeLEDwillturngreen
Note: -ProgrammingCodecannotbeerased,i.e.thecode0000isnotvalidandwillnoterase
 theProgrammingCode.
TheOpenCode2ismainlyusedasamethodtoquicklytesttheLockStrikeRelayduringinstallation.
TheDefaultFactorySettingfortheOpenCode2is0852.Whentherstuserisaddedtothecontroller,
thedefaultOpenCodewillautomaticallybedeleted,readyforanewOpenCode2tobere-entered.