Instruction manual

10 11
Changing the Modes of OperationModes of Operation
Changing from Normal Mode to Secure Mode :
ThedefaultfactorysettingfortheNormal/SecureCodeis3838
1)Enterthe4-digitNormal/SecureMode
•ModeLEDwillFlashred
2)Pressthe“#”keytoconrmtheModeChange
•ModeLEDisred
Changing from Secure Mode to Normal Mode :
ThedefaultfactorysettingfortheNormal/SecureCodeis3838
1)Enterthe4-digitNormal/SecureMode
•ModeLEDwillFlashgreen
2)Pressthe“#”keytoconrmtheModeChange
•ModeLEDisgreen
Changing from Normal Mode to Bypass Mode :
Seepage18tocreate/modifytheNormal/BypassCode
1)Enterthe4-digitNormal/BypassMode
•ModeLEDwillFlashorange
2)Pressthe“#”keytoconrmtheModeChange
•ModeLEDisgreen
Changing from Bypass Mode to Normal Mode :
Seepage18tocreate/modifytheNormal/BypassCode
1)Enterthe4-digitNormal/SecureMode
•ModeLEDwillFlashgreen
2)Pressthe“#”keytoconrmtheModeChange
•ModeLEDisgreen
The SA1DK has 3 Modes of Operation:
1) Normal Mode
ModeLEDisgreen
NormalModeisthedefaultmode.InnormalModethedoorislockeduntilaPrimaryCode
ispresentedtothecontroller.Specialcodessuchas“OpenCode1”and“OpenCode2”
areactiveinNormalmode.(SeePage16formoreinformationonOpenCode1&Open
Code2).
2) Bypass Mode
ModeLEDisorange
IsBypassMode,accesstothepremisesisdependentonwhetherthecontroller’sLock
StrikeRelayisprogrammedforFailSafeOperationonFailSecureOperation.
WhentheLockStrikeRelayisprogrammedforFailSecureOperation,thedoor
islockeduntiltheDoorBellButtonispressed.
WhentheLockStrikeRelayisprogrammedforFailSafeOperation,thedooris
constantlyunlocked.
3) Secure Mode
ModeLEDisred
OnlySecureandMasterUserscanaccessthepremisesduringtheSecuredMode.
ASecureUsermustentertheirPrimaryandSecondaryCodestogainentry.
AfterenteringtheirPrimaryCodetheDoorLEDwillashgreenfor10seconds,
duringwhichtheSecondaryCodemustbeentered.
AMasterUseronlyneedstopresenttheirPINcodeoncetogainentry.