Instruction manual

20 21
Setting Fail Safe / Secure Operation
Setting Tamper Siren Time
Setting the Lock Strike Release Time
Enrolling Primary & Secondary Codes
1)EnterProgrammingMode
2)Press“6”toenterMenu 6
 •TheModeLEDwillashgreen
3)Constructthe4-digitcodeusingtheinstructionsbelow:
First Digit
 ForFailSecureOperationtherst
 digitshouldbe“0”
 ForFailSafeOperationtherst
 digitshouldbe“1”
Second Digit
 TamperSirenTime,enterany
 numberfrom1to9minutes.
Third and Fourth Digit
 Enterthenumberofsecondsfrom
 (1to99seconds)thatyouwant
 theLockStriketobereleased.
 Forexample0512meansFailSecureOperation,witha5minuteTamperSirenTime,
 anda12secondLockStrikereleasetime.
4)SystemreturnstoNormalMode
 •Youwillhear3beeps
 •TheDoorLEDwillturnoff
 •TheModeLEDwillturngreen
Primary Codes
 -PrimaryCodescanonlybeenrolledtoanemptyUserSlot,i.easlotwherethereisno
 existingPrimaryCode.
 -PrimaryCodesmustbeunique,i.e.oneusersPrimaryCodemaynotbethesameas
 anotherusersPrimaryCode.
 -PrimaryCodescannotbethesameasanysystemcodes,suchastheNormal/Secure
 CodeorOpenCode.
 -UserswhoholdaPrimaryCodecangainentryonlyduringNormalMode.
Secondary Codes
 -SecondaryCodescanonlybeenrolledtoUserSlotthatalreadyhasaPrimaryCode
 enrolledbutnoSecondaryCode.
 -SecondaryCodesdonothavetobeunique,i.e.multipleuserscanallholdthesame
 SecondaryCode.
 -SecondaryCodescannotbethesameasanysystemcodes,suchastheNormal/
 SecureCodeorOpenCode.
 -UserswhoholdSecondaryCodescangainentryinanyModeofOperation.
Enrolling Primary and Secondary Codes
Therearetwomethods to enroll PrimaryandSecondarycodes,theStandardMethod and the
CodeSearchMethod.
 A.TheStandardMethodismainlyusedwhentheUserSlotnumberfortheuseryou
 wishtoprogramisknown.YoucanprogrambothPrimaryandSecondaryCodes
 usingtheStandardmethod.(SeeEnrollingUserswiththeStandardMethodonPage
 22)
 B.TheCodeSearchMethodismainlyusedwhenenrollingauserSecondaryCodeand
 theUserSlotCodeisunknown.TheCodeSearchmethodonlyworksifausers
 PrimaryCodeisalreadyenrolledbuttheSecondaryCodeisnot.(SeeEnrollingUsers
 withtheCodeSearchMethodonPage23)