Instruction manual

7
The SA1DP has three modes of operation :
•Normalmode-ModelLEDisgreen.
Normal Mode is the default mode. In Normal Mode, the door is locked until a Primary Code is
presented to the controller. Special codes such as “Open Code 1” and “Open Code 2” are active in
Normal mode (See Changing Open Code 1 and Changing Open Code 2).
•Bypassmode-ModeLEDisorange.
In Bypass Mode, access to the premises is dependent on whether the controller’s Lock Strike
Relay is programmed for Fail Safe Operation or for Fail Secure Operation.
When the Lock Strike Relay is programmed for Fail Secure Operation, the door is locked until the
Door Bell Button is pressed. When the Lock Strike Relay is programmed for Fail Safe Operation,
the door is constantly unlocked.
•Securemode-ModeLEDisred.OnlySecureandMasterUserscanaccessthepremisesduring
the Secure Mode.
ASecureUsermustenteraPrimaryandaSecondaryCodeinordertogainentry.Afterentering
thePrimaryCode,theDoorLEDashesgreenfor10seconds,duringwhichtimetheSecondary
Codemustbeentered.AMasterUseronlyneedstopresentaproximityCardorPINcodeoncein
order to gain entry.
7. Modes of Operation