Instruction manual

6
Figure 4 : Wiring the BL-D40 External Sounder
SA1DP
The SA1DP accepts up to 500 users and provides entry via the use of proximity cards and/or PIN
codes. Each user is provided with two code memory slots : Memory Slot 1 (Primary Code) and
Memory Slot 2 (Secondary Code). The two Memory slots can be programmed as Proximity Cards,
PIN codes, or as a combination of both Proximity Cards and PIN codes.
The way that the two memory slots are programmed determines a user’s access level and also
determines the way that the SA1DP grants access in its three modes of operation.
There are three user levels :
Normal User -A Normal User only has a Primary Code and is only Granted access when the
SA1DP is in Normal or Bypass mode.
Secure User-A SecureUser musthavea Primaryand SecondaryCodeprogrammed; thetwo
codesmustnotbethesame.TheSecureUsercangainaccesswhentheSA1DPisinanyofits
threemodesofoperation.InNormalmode, theSecureUsermustpresent bothaPrimaryand
Secondary Code in order to gain entry.
Master User-AMasterUsermusthavebothPrimaryandSecondaryCodesprogrammedwiththe
sameProximityCardorPINcode.ThemasterUsercangainaccessduringanymodeofoperation
bypresentingaProximityCardorPINcodetothecontroller.(TheMasterUserisconvenient,butis
lesssecurethanaSecureUser).
6. Normal, Secure, and Master Users