Instruction manual

18
12.10 Deleting Primary and Secondary Codes
There are two methods to delete Primary and Secondary Codes : the Standard Method and the
Code Search Method.
When deleting a user Slot, both the Primary Code and the Secondary Code are erased.
12.10.1 Deleting Primary and Secondary Codes using the Standard Method
1. Enter Programming Mode.
2. Press “8” to enter Menu 8.
The Mode LED turns red.
3.Enter3-digitUserSlotcodesthatyouwanttodelete.
TheModeLEDashesredindicatingthatthecontroller
iswaitingfortheProgrammingCodetoconrmthedeletion.
IftheUserSlotisempty,alongbeepisemittedandthe
SA1DP returns to Normal Mode.
4.EnteryourProgrammingCodetoconrmthedeletion.
 •IftheProgrammingCodeisvalid,3beepsareemitted,
and the SA1DP returns to Normal Mode.
 •IftheProgrammingCodeisinvalid,alongbeepis
emitted, and the SA1DP returns to Normal Mode.
Note : It is recommended that a record be kept of added and deleted users, so that it is easier to
keep track of which user slots are empty and which user slots are not.
12.10.2 Deleting Primary and Secondary Codes Using the Code Search Method
1. Enter Programming Mode.
2. Press “8” to enter Menu 8.
The Mode LED turns red.
3.Enter3-digitUserSlot“000”.
TheDoorLEDashesorange,indicatingthatthecontroller
is now waiting for the Primary Code of the user that you want
to delete.
4. Present the Proximity Card or enter the 4-digit PIN Code of
the Primary Code belonging to the user that you want to delete.
TheModeLEDashesred.
 •IftheProgrammingCodeisvalid,3beepsareemitted,
and the SA1DP returns to Normal Mode.
 •IftheProgrammingCodeisinvalid,alongbeepisemitted,
and the SA1DP returns to Normal Mode.
Note : It is recommended that a record be kept of added and deleted users, so that it is easier to
keep track of which user slots are empty and which user slots are not.