Instruction manual

13
12.5 Changing the Programming Code
1. Enter Programming Mode.
2. Press “3” to enter Menu 3.
The Mode LED turns green.
3. Enter the new 4-digit code that you want to set as the
Programming Code. The system returns to Normal Mode:
 •3beepsareemitted.
 •TheDoorLEDturnsoff.
 •TheModeLEDturnsgreen.
Note : Programming Code cannot be erased, meaning that the code 0000 is not valid and does
not erase the programming Code.
12.6 Changing the Normal/Secure Code
1. Enter Programming Mode.
2. Press “4” to enter Menu 4.
TheModeLEDashesred.
3. Enter the new 4-digit code that you want to set as
Normal/Secure Code. The system returns to Normal Mode:
 •3beepsareemitted.
 •TheDoorLEDturnsoff.
 •TheModeLEDturnsgreen.
Note : When the Auxiliary Mode is 1, 2, 3, or 4, the Auxiliary Input takes priority over the
Normal/Secure Code.